Elite EXP Weight Range Guide

Your Elite EXP Adjustable Dumbbells come with two sets of micro weights per handle. These small weights are easily removable and allow you to adjust the weight of your dumbbells in smaller increments, further maximizing the weight range of your dumbbells. 

Note: The empty Elite EXP handle is 5 lbs/2.3 kg. Each micro weight weighs 2.5 lbs/1.1 kg. 

How to adjust your micro weights

  1. To adjust your micro weights, first remove the Elite EXP handle from the weight stack.
  2. Next, with the handle facing up, move the Auto Lock to the “Open” position. This will allow the micro weights to slide in and out of the handle. (Please remember to use caution when the Auto Lock is open.)
  3. Once the desired micro weights are in the handle, close the Auto Lock and insert the handle back into the weight stack.
  4. Insert the selector pin into the colored side rail of your desired weight and refer to the chart below for the correct load with your micro weight combination.
Elite EXP 90 showing moveable micro weights in the handle

MICRO WEIGHT CONVERSION - LBS

Elite EXP colored with chart with micro weights in lbs

Handle Only Weight LBS

  • Handle with no weight plates attached - 5 lbs
  • Handle with 1 Micro Weight - 7.5 lbs
  • Handle with 2 Micro Weights - 10 lbs

MICRO WEIGHT CONVERSION - KG

Elite EXP colored with chart with micro weights in lbs

Handle Only Weight KG

  • Handle with no weight plates attached - 2.3 kg
  • Handle with 1 Micro Weight - 3.4 kg
  • Handle with 2 Micro Weights - 4.5 kg

Download and print your own weight chart

Lbs weight chart
KG weight chart
Download a printable version of this guide

How to change the weight of your Elite exp adjustable dumbbells

  1. Refer to the weight chart on the handle to select your desired weight and identify the matching color.
  2. If necessary, remove one or two micro weights from the handle.
  3. Insert the Selector Pin into the side of the weight stack at the matching colored side rail to set the weight.